
4 Modules Small Size Single Phase Energy Meter 50A KWH LCD Display Din Rail
Features :
1.Single direction measure single phase two wire active energy
consumption. It is nothing with direction of the flow of load
current. Complying with standard IEC 62053-21.
2. Six pole width (Modulus 12.5mm), complying with standard
JB/T7121-1993.
3. Standard configuration 6+1 digits display (999999.1kWh). May
select 5+2 digits display (Please specified when ordering).
4. Standard configuration short terminals cover, may select
extension terminals cover, in order to protect
to use safety. (Product Configuration code is JF).
5. Two LED instructions respectively power supply state (green) and
signal of energy impulse (red).
6. Standard configuration don’t detection direction of the flow of
load current. May select automatic detection the direction of the
flow of load current. And instructions by an individual LED.
7. 35mm standard DIN rail installation, complying with standard DIN
EN50022. Or front board setting
(mounting holes center distance 63 mm), users can choose any one by
themselves.
8. Standard configuration type S wiring (Inlet from bottom, outlet
from top) for direct connect operation, we can also choose another
type of connection, and use CT (Product Configuration code is IC)
and PT & CT (Product Configuration code is HC) for operation.
9. Standard configuration Impulse output passive (polarity),May
select distant impulse output passive (no
polarity). And contact with all kind of AMR system
conveniently,complying with standard IEC 62053-31
and DIN 43864.
Decriptions :
Specifications :
Model | Accuracy | Frequency | Size | Reference Voltage(V) |
YEM011JC | 1.0 | 50-60HZ | 88x75x73mm | 127 V ,230 V |
Material | Current Specification(A) | Staring Current(A) | Display Mode | Insulation Performence |
PC | 5(30)A ,10(50)A, 20(100)A | 0.02A,0.04A, 0.08A | LCD 6+1/5+2 | AC voltage 4kv for 1 minute, 1.2/50us wavefrom impulse voltage 6kv |
Transport and storage :
Transport and storage of the meter must not be shaken and must accord with ZBY002-81.The meter must be stored in the original packing box and the environmental temperature is in -20℃~+55℃ .Relative humidity shall not exceed 95%. And there isn’t any corrosive gas. The environmental temperature shall not vary violently.The meters should be in the original packing box and the boxes should be piled up no more than five on the rack . The separate meter is not suitable for storage.
Detail :
Dimensions:
YUEQING YOMIN ELECTRIC CO., LTD
Established in 2002, YUEQING YOMIN ELECTRIC CO., LTD(before named Zhengjiang Yomin Electric Co., Ltd , founded in 1996) is a manufacturer and exporter specialized in the research, development and production and service of different kinds of Single-phase and three-phase mechanical watt-hour meter, long-life watt-hour meter and single-phase electronic watt-hour meter, three-phase electronic watt-hour meter and Multi-rate Meter, multi-function Meter, prepaid meters, Power Line Carrier meters, multi-function carrier meters, digital meters, pointer meter, terminals and accessories etc.
Located in Wenzhou City, Zhejiang Province, we are quite close to Shanghai and Ningbo port. Covering an area of 12000 square meters for manufacturing and administration, we now have over 370 employees making their great efforts for YOMIN. Most of our products are supplied by tender and widely used in domestic and overseas electricity power companies in more than 90 countries and regions.
Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. Besides, we are awarded with international certificates such as ISO9001, KEMA, CE RoHS, CB, BV etc as well as China domestic certification like CCC and CMC.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to building successful business relationships with new and old clients around the world in the near future!