Hand - Held Fingertip Pulse Oximeter with SPO2 probe With OLED Display

Product Description

Model: FPX-034

Display Type: OLED display
- SP02 Measurement Range: 70%-100%
- Accuracy +/-2% on the stage of 70% - 99%
- Pulse Range Measurement Range: 25 – 250 BPM
- Accuracy +/-1BPM or +/-1% (larger)

Power Requirement: Two AAA 1.5V alkaline batteries
- Voltage range: 2.6 - 3.6V

Low Consumption: Less than 30mA
Measurement Accuracy: SpO2 Accuracy +/-2% on the stage of 70% - 99%
- No definition of less than 70%
- Pulse rate +/-1BPM or +/-1% (larger)
Measurement Performance in Low Perfusion Condition: The pulse wave is available without failure when the simulation pulse wave amplitude is at 6%

Anti-interference ability of ambient light: Natural light in indoor lighting and the existing oxygen measurements under dark conditions with the measured values compared to less than 1%.

The product will automatically be powered off when no signal is in the product for longer than 8 seconds.

Dimension Length: 58 mm, Width: 32mm
- Weight: 54g (including two AAA batteries)

Environment Requirements: Operation Temperature: 40° F - 104°F
Storage Temperature: 50° F - 104°F

The Oximeter is calibrated to display functional oxygen saturation. Principle of the Oximeter is as follows:

An experience formula of data process is established taking use of Lambert Beer Law according to

Spectrum Absorption Characteristics of Reductive hemoglobin(R Hb) and Oxyhemoglobin (O2 Hb) in glow

and near-infrared zones. Operation principle of the instrument is Photoelectric Oxyhemoglobin Inspection

Technology is adopted in accordance with Capacity Pulse Scanning and Recording Technology, so that

two beams of different wavelength of lights (660nm glow and 940nm near infrared light) can be focused

onto human nail tip through perspective clamp finger-type sensor. Then measured signal can be obtained

by a photosensitive element, information acquired through which will be shown on OLED display through

process in electronic circuits and microprocessor.

Shenzhen Fitconn Technology Co., Ltd, was founded in 2006 and specialized in such fields as research and development, production, sale, service of medical products for home healthcare, which is one of the modern high-tech enterprises. Its products range from compressor nebulizer, anti-decubitus air bed, mesh nebulizer etc. The company's sales have maintained a high speed growth of 60% for four years. Its technology, products and services of home healthcare have been enjoyed by more than 2000000 families and customers from 150 countries and regions around the world.

The company, with perfect management system, strongly technical force and capacity of production of OEM/ODM, possess national-second-category certification to produce medical equipment and 5000 square meters of producing base while its workers consist of 30% of junior technical staff and 10% of middle and senior.

In recent years, Fitconn has been actively implementing the intellectual-property strategies to protect the rights including patents, trademarks, copyright. By end of 2017, Fitconn has obtained 25 patents, which passed the EU ISO13485 quality-system verification, and some products have passed CE and FDA.

Through more than 10 years of development, Fitconn has become a well-known supplier of medical products for home healthcare, relying on the diligent spirit derive from staff of Fudikang, which embrace integrity, cooperation, innovation, expertise, embedding in the corporate’s culture. Which relying on "sincerity" and "letter" and, the discipline of enterprise, based on the market economy, the enterprise have won the favor of customers. Whether from the Fitconn product development to service system, or suppliers and dealers of upstream and downstream, they are all in line with the "terminal-customer-oriented " mission and attitude so that for terminal users produce excellent products and provide high-quality service. What has sustained the constant development of Fitconn is the corporate’s culture with diligent quality.