K3163i Electronic Energy Meter Calibration Equipment 10 Channels Outputs DC 0-350V

Able of what K31 series can test

Characteristic

• 10 Channels (6x32A & 4x310V) outputs, Each output channels are independent and simultaneous control of magnitude, Phase angle and frequency values, able to inject DC, AC sine wave and up to 20x harmonics.
• Variable battery simulator, DC 0-350V, 140Watts max.
• 13 Low-level channels outputs up to 8Vac/10Vdc max.
• 0-600V / 0-5A AC/DC measurement in 0.1 class.
• Graphical test modules and templates for testing of various relays
• Quick relay testing facility in Manual mode
• Shot/Search/Check, Point & Click testing
• RIO/XRIO import & export facility
• Switch on to fault test(SOTF)
• Power system model for dynamic testing
• Inbuilt GPS and IRIG-B sync end-to-end testing
• Online Vector display
• Automatic test results assume
• Automatic test report creation
• Anti-clipping detect, Wrong wiring connect alarm and self-protect, overload and overheat protection

Energy Meter Calibration(Optional)

Interface Introduction

Energy meter calibration is specialized in testing module of energy meter for electronics and electromechanics, once the parameters of specified energy meter has been injected to this module, these data can be saved for further usage, User can use the basic parameter interface of energy meter module to default import all the saved energy meter settings in the box of the module, and user could check, edit, delete and add the objectives of energy meter. On the part of viewing, editing, deleting and adding, click to next, new adding and editing will process automatically.

Energy meter calibration software interface

Parameter Setting

Fig Testing viewing

Rating current: The rating current of energy meter

Pulse constant (Pulse/KWh): Be tested pulse constant of energy meter.

Warm-up time: Be tested starting up preconditioning time of energy meter.

Startup time: Energy time start-up time.

Ambient temperature: the ambient temperature under current testing

Relative humidity: The relative humidity under current testing

Fig Testing view

Meter type: select 4-wire, 3-wire, single phase energy meter, active power, reactive power, apparent power

Meter constant: Energy meter pulse constant

Direction: There are energy pulsing signal output and energy pulsing signal input from energy meter. Outer port is energy pulse signal output, inner port is energy pulsing signal input. If when tested pulsing signal energy meter by device, it shall be set as inner port.

Pulsing type: Energy pulsing signal type, can be selected rising and falling.

CT/PT Ratio: The setting of transformer ratio

Certified: Signature of tester

Settling time: The stable output time of energy meter

Pulses/Rotation: the each circle relative pulsing number of energy meter

Class: Energy meter grade

Testing Procedure

1)Testing connection

Fig Testing connection

Energy pulsing input testing line use and supply by manufacturer standard testing line

2) Testing procedure

To set each parameter of energy meter in the software according to chapter 6.5.2 instruction, add test point, start to test, test device will calculate the outputted energy value to energy meter through real output voltage, current, phase and output time. After energy meter receive test device output energy simultaneously, it will output corresponding energy pulsing signal to test device, test device will output energy value and receive energy pulsing signal to prepare, then calculate present testing point error in order to determine the test result.

Who am I ?

Since its establishment in 1999, Kingsine Electric Automation Co., Ltd. has focused on researching and developing, producing, and selling Protection Relay Test Sets, CT Analyzers, Reference Power Sources and Calibrators, Voltage and Current Amplifiers, Electricity Monitoring Systems, and Instrumentation. To date, Kingsine's products have been recognized by customers in more than 80 countries worldwide. We regularly participate in large-scale power and energy exhibitions worldwide, including in the United States, Italy, France, Poland, Australia, Dubai, Turkey, Brazil, Philippines, Malaysia, Indonesia, South Africa, Egypt, and other countries, and have received widespread acclaim.Our protection relay testing equipment is compatible with world-renowned relay protection devices such as ABB, SIEMENS, ALSTOM, MITSUBISHI, Schneider, AREVA, SEL, GE, and others. Kingsine Electric has also established a distribution network with partners in the Americas, Europe, Asia, the Middle East, and other countries to provide comprehensive services.

Kingsine is a core supplier to China's State Grid

The facts demonstrate that China's annual power generation has remained the world's number one, with a projected power generation of 840 billion kilowatt hours in 2022, compared to the United States' projected 430 billion kilowatt hours in the same year. China has built the world's most advanced power transmission system for DC current at 1100KV ultra-high voltage levels and more than 11,000 digitized substations based on the IEC61850 standard. China's power grid has the largest, most advanced, safest and most stable power system in the world. We are honored to be the core supplier for State Grid Corporation of China.

Where did I come from?

Kingsine Electric is located in Shenzhen, the "Innovation Capital of China". We have also established subsidiaries in Canada and Hong Kong. Shenzhen is a benchmark city for the development of China's high-tech industry and is home to leading Chinese companies in various industries. Many of China's top companies, including Huawei, the world's largest communication company; DJI, the world's largest commercial drone company; BYD, the world's largest electric vehicle company (which sold 1.86 million electric vehicles globally in 2022, surpassing Tesla's sales of 1.37 million); and Tencent, one of China's leading internet companies, are based in Shenzhen. Excellent enterprises can influence each other, and as the world's factory, Shenzhen has a highly advanced and comprehensive industrial chain, which provides a reliable guarantee for Kingsine Electric to develop, produce, and manufacture high-tech, high-quality, and reliable products.

Where am I going?

Philosophy

Adhering to the belief of novelty in technology and detail in service, and gradually establishing a global service and sales network with worldwide partners and distributors, Kingsine shall spare no effort to serve customers worldwide with innovative technology, reliable products, and quality online service, making electric testing easier across the world.

Business Principles

Kingsine's business principle is to create value for customers, which is reflected in three aspects.

Firstly, Kingsine uses advanced technology to create powerful product features that offer customers a great operating experience.

Secondly, Kingsine provides high-quality products and services at reasonable prices, ensuring that customers receive high value for their investment.

Thirdly, Kingsine emphasizes reliability and after-sales service, providing quality assurance through lean production and ensuring that products have over 15 years of service life and three years of warranty. Kingsine's after-sales maintenance principle is based on cost accounting, ensuring that after-sales service remains efficient and affordable.Based on our modular product design philosophy, and with the help of efficient video diagnostics, our target for after-sales maintenance service is to complete repairs within 20 days.